JVC-1623 (VCR Remote) Instructions

If you TV is JVC, no code is necessary. Some other JVC Remotes may not need the "0" zero in front of the # when programming.

PREPARATION

1. Turn the TV's power OFF using the TV's Remote.
2. Set the remote SWITCH (TV/CABLE/VCR) to TV (or CABLE if setting CABLE CODE)
3. While holding down the POWER button, enter you TV's (or CABLE for Cable setting) brand code with the digit keys then press STOP
1. Brand setting is completed. Once you set the brand, you don't have to reset until you replace the batteries.
2. If you set the wrong code, re-enter theright code.
4. Press the POWER button to turn the TV (Cable) power back on to check code.

OPERATION

1. Set SWITCH to TV, operate TV.
1. Power, TV/Video, Ch +/-, Vol +/-
2. Set SWITCH to VCR to operate VCR.
3. Set SWITCH to CABLE to operate CABLE Box.
   

TV Brand Name & Code

Code	TV Brand Name
01	JVC
02	Magnavox
03	Mitsubishi
04,11	Panasonic
05	RCA
12	Samsung
13	Sanyo
13	Sears
06	Sharp
07	Sony
08	Toshiba
09	Zenith
10	Hitachi

Cable Box Brand name & Code

Code	Cable Box Brand Name
01, 02, 03, 04, 05, 06, 07, 08	GI, Jerrold
09, 10	Scientific Atlanta
11, 12	Zenith
13, 14	Pioneer
15, 16, 17, 18	Hamlin, Regal
19, 20, 21	Sigma, Tocom
22, 23, 24, 25, 26	RCA, Panasonic, Sprucer