RMTU-100 Component Codes

Programming The Remote Control:

Find your equipment's brand code.
Press and hold the VCR,TV or Cable key while entering the 2 digit code number.The mode key will flash 5 times if the code was excepted.

Special Operating Conditions:

The Caption, Menu and Reset keys will operate only Sanyo televisions. This is true even when you program the remote to operate another brand of TV or when you select the VCR or Cable mode.
The Display, Sleep, VOL (plus), VOL(minus), Mute and recall keys operate TV functions regardless of the mode selected.
The Video key has no function in the Cable mode.
The Recall key has no function in the VCR and Cable modes.
Refer to the original owner's manual for specific operation of certain functions, such as Sleep and Recall.

Operating tips and Troubleshooting Hints:

To operate each product(VCR,TV or Cable Box), you must first press the proper mode key (VCR,TV or Cable Box).
Some manufacturers use different types of remote controls. If your brand list several codes,try the code listed first. If neccesary, reprogram with each number until you find the correct code.
There may be VCR's,TV's and Cable boxes that this remote control cannot operate and some models may work partially.
The remote control must be reprogrammed if the batteries are replaced.
Remove the batteries if the remote control will not be used for a month. Normal battery life is usually 6 months.
If the remote control fails to operate any of your equipment,replace the batteries. Be sure they are installed correctly.