Sharp Remote: VC-H982 VCR
The Codes for the different brand of TV's:
| TV | Codes |
|---|---|
| Emerson | 18 |
| Fisher | 16 |
| Funai | 05 |
| GE | 06, 08 |
| Goldstar | 17 |
| Hitachi | 14 |
| JVC | 15 |
| Magnavox | 08, 10 |
| Mitsubishi | 13 |
| Panasonic | 12, 20 |
| RCA | 06, 08 |
| Samsung | 19 |
| Sanyo | 16 |
| Sharp | 01, 02 |
| Sony | 09 |
| Technol Ace | 03 |
| Toshiba | 11 |
| Zenith | 04, 07 |
Here are the codes and instructions for programming your remote control to
work with your Cable/Sat Box:
The Codes for the different Cable Boxes:
| Manufacturer | Codes |
|---|---|
| Jerrold | 01, 04, 05, 06, 07, 02, 03, 08 |
| Oak | 16 |
| Panasonic | 13, 14 |
| Phillips | 18 |
| Pioneer | 15 |
| RCA | 13, 14 |
| RCA SAT | 19 |
| Regal | 17 |
| Scientific AT | 09, 10, 11 |
| Sony SAT | 20 |
| Zenith | 12 |
Instructions:
- Press and hold down the Cable/Sat and channel plus button on your VCR remote control.
- Then release them after a few seconds.
- Now enter the first 2 digit code (all codes are only 2 digits, example: 01, 20, etc.)
- Point the remote control at the Cable Box and press Cable/Sat button and release it. Now press power and release.
Instructions:
- Press and hold down the TV and channel plus button on your VCR remote control.
- Then release them after a few seconds.
- Now enter the first 2 digit code(all codes are only 2 digits, example: 01, 20, etc.)
- Point the remote control at the TV and press TV and release it. Now press power and release.