Sony RM-V11

Setting the Code

  1. Set the slide switch on the Remote Commander to VCR (to set up a VCR), CABLE (to set up a cable box), or TV (to set up a TV).
  2. If more than one code number is listed, use the number that's listed first to complete the steps that follow. For example, if you're setting up a Philip's VCR, you would use code number 08.
  3. Press and release the S (SET) button.
  4. Enter the component's code number. For example, if you're entering the code for a Philip's VCR, you would press and release 0, then press and release 8.
  5. Press and release the ENTER button to store the code number in the Commander's memory.

If you cannot get the remote commander working with a code from the table, see the instructions below on Searching for the Correct Code.

TV and VCR Codes

Brand Component Code No.
Sony VCR 01 (Vtr3: VHS)
02 (Vtr2: 8mm)
03 (Vtr 1:Beta)
TV 01
Admiral
(M.Wards) 		VCR 27
TV 02, 14, 09
Aiwa VCR 38
AOC TV 12
Audio
Dynamic 		VCR 14, 37
Bell &
Howell
(M.Wards) 		VCR 30, 43
TV 14, 09, 38
Brocsonic VCR 19
TV 03, 12
Canon VCR 09, 08
Citizen VCR 32
Craig VCR 15, 02, 32
TV 22, 23, 20, 21
Croslex TV 11
Curtis
Mathis 		VCR 04, 38, 09
TV 03, 19, 23
Daewoo VCR 41, 12, 09
TV 35, 36, 03
TV/VCR
Combo 		36 (TV) &
41 (VCR)
Dayton TV 13
DBX VCR 14, 36, 37
Dimensia VCR 04
Emerson VCR 19, 20, 16, 17,
18
TV 12, 13, 20, 21,
23, 03, 15
TV/VCR
Combo 		21 (TV) &
20, 19 (VCR)
Fisher VCR 30, 34, 35, 33
TV 25
Funai VCR 38
General
Electric 		VCR 29, 04, 09
TV 02, 18, 03, 07
TV/VCR
Combo 		TV code &
32 (VCR)
Hitachi VCR 08, 04, 05
TV 31, 13, 03, 32
Instant
Replay 		VCR 09, 08
JC Penny VCR 09, 05, 04, 30,
14, 36, 37
TV 03, 02, 30, 07
JVC VCR 14, 36, 37
TV 28, 29
Kenwood VCR 14, 36, 32, 37
KTV TV 33, 13, 03, 23,
34
LXI (Sears) VCR 32, 05, 33, 34,
30, 35
TV 02, 03, 11, 25,
19, 12
Magnavox VCR 10, 08, 09
TV 11, 12, 13, 03
TV/VCR
Combo 		11, 18 (TV) &
09, 11 (VCR)
Marantz VCR 14, 36, 37
Marta VCR 32
Memorex VCR 09, 35
Minolta VCR 05, 04
Mitsubishi/
MGA 		VCR 23, 24, 25, 26
TV 24, 03, 12
Multitech VCR 25, 38, 21
Brand Component Code No.
NEC VCR 14, 36, 37
TV 03, 12
Olympic VCR 09, 08
Panasonic VCR 08, 09, 06, 07
TV 18, 16, 17, 07
TV/VCR
Combo 		18 (TV) &
08, 09 (VCR)
Pentax VCR 05, 04
Philco VCR 08, 09
TV 11, 13, 03
Philips VCR 10, 08, 09
TV 11
Pioneer VCR 08
TV 37, 18, 19
Portland TV 03, 08
Quasar VCR 08, 09
TV 18, 07
TV/VCR
Combo 		18 (TV) &
09 (VCR)
Radio
Shack 		TV 02, 12, 24, 23
RCA/
PROSCAN 		VCR 04, 05, 08, 09,
10, 11, 12, 13, 22
TV 02, 03, 04, 05,
06, 07, 08
TV/VCR
Combo 		18 (TV) &
08 (VCR)
Realistic VCR 09, 30, 28, 35,
24, 38
Sansui VCR 14
Singer VCR 15
Samsung VCR 22, 13, 21
TV 26, 12, 13, 03
TV/VCR
Combo 		23, 27 (TV) &
21, 22, 26 (VCR)
Sanyo VCR 30, 35
TV 25, 22
Scott VCR 12, 13, 21, 35,
23, 24, 25, 26
TV 23, 12
Sharp VCR 27, 28
TV 14, 13, 15
Shintom VCR 15
Signature
2000
(M.Wards) 		VCR 38, 27
TV 14, 09
Sylvania VCR 10, 08, 09, 38
TV 11, 12, 03
Symphonic VCR 38
TV 23, 39
TV/VCR
Combo 		23 (TV) &
38 (VCR)
Tashiro VCR 32
Tatung VCR 14, 36, 37
Teac VCR 14, 36, 38, 37
Technics VCR 09, 08
Toshiba VCR 12, 11
TV 19, 14
Videch TV 31, 03, 12
Wards VCR 27, 28, 36, 31,
32
TV 13, 03, 15, 12
Yamaha VCR 30, 14, 36, 37
Zenith VCR 31
TV 09, 10

Cable Box Codes

Brand Code No
Hamlin/
Regal 		22, 23, 24, 25, 26
Jerrold/G.I. 01, 02, 03, 04, 05, 06, 07,
08, 18
Oak 27, 28, 29
Panasonic 19, 20, 21
Pioneer 14, 15
Scientific
Atlanta 		09, 10, 11
Tocom 16, 17
Zenith 12, 13

Searching for the Correct Code

If you've tried all the code numbers listed for your component and you still cannot get the Commander to work (or if your component is not listed in this manual), try these steps:

  1. Power on the component you want to set up. Then set the slide switch on the Remote Commander to VCR (to set up a VCR), CABLE (to set up a cable box), or TV (to set up a TV).
  2. Press and release the S (SET) button.
  3. Press and release the CH+ button. Then press and release the POWER Button.
  4. Repeat step 3 until your component powers off. Pressing CH+ and POWER repeatedly will try every available code until the correct one is found. Be patient as you do this; it may take 50 or 60 tries until the correct code number is located.
  5. When the component powers off, press and release the ENTER button to store the code number in the Commander's memory.
  6. Check that the Commander is operating the other functions of your component. Press the channel and volume control buttons. If the Commander seems to be working properly, you're done setting up the Commander.